Our Tips For Cleaning a Green Pool

There’s nothing more annoying than jumping into a pool, only to find that it’s a green pool. But what exactly is a green pool? It’s a pool that has been overtaken by algae. When you have a green pool, that means a wide variety of aquatic plants have started to invade every nook and cranny of your pool. This is why your pool is filled with green-tinted water.

Having a green pool is quite a disaster, but it can be cleaned. The goal is to ensure your pool’s water will become as clear as it used to be in just a few days. It will take some commitment and manual labor. Regular pool cleaning and maintenance are important. To help you out, here’s what you need to do to clean a green pool:

Preparation

Let’s start with preparation. Preparation is key when treating a green pool. The first thing you need to determine is the chemical situation of your pool. This involves checking the chlorine and pH levels of your pool. It’s best to have one to three ppm of free chlorine to stabilize the pH level of the pool water. Afterward, you need to run a filter for 24 hours to clear out the algae, aquatic plants, and other pool debris such as leaves and twigs. Finally, you need to use a pool brush to scrub the sides and bottom of your pool.

Pool Shocking

The next thing you need to do is pool shocking. That means you have to add the right amount of chlorine at once to get rid of flourishing algae. There’s a vast array of pool shocks or concentrated chlorine out in the market. They come in powder or liquid form. First off, turn on your pool pump to get the water circulating. Then, pour your pool shock into the pool. You’ll want to disperse the shock evenly throughout the pool with the help of the pump. This will ensure that it will kill any algae that are growing in your pool. Once they’re dead, keep the filter running for a few days to clean the dead algae out completely.

Pool Cleaning

Pool cleaning is important. Once you’re done with pool shocking, you have to make sure that you get the dead algae entirely out of the water. Dead algae will make your pool cloudy. As mentioned, keep the filter running 24/7 for a few days until the water becomes crystal clear again. Also, you have to brush the sides of the pool to ensure that any algae sticking to them will be eliminated too. Finally, vacuum the bottom of the pool to get rid of any dead algae that sank to the bottom. With regular brushing and vacuuming, and if you keep the filter running 24 hours a day, you can expect your pool to have clear water within the next five days.

Green Pool Prevention

As always, prevention is better than cure. This also applies to pool cleaning and maintenance. As you know, cleaning a pool is a tedious task, and the whole process can put your pool out of commission for a week. After dealing with a green pool, chances are you want to make sure it doesn’t happen again. That said, make sure you keep at least 1.0 ppm of free chlorine in the water at all times. Test and adjust the water chemistry regularly, at least two to three times a week.

Make sure you have a way of keeping the pool chlorinated, even when you’re away. In the end, nothing beats regular maintenance. That’s the best way to make sure your pool is well-cared for and has crystal clear water.

Purple Heart Pools is a top-rated pool maintenance company in Jacksonville, get in touch today to see how we can help.

How to Extend Your Pool’s Life.

It’s great to have a swimming pool at home. You can swim in it all you want, all year round, particularly during summer.

A swimming pool is a luxury, which means not every home has one. If yours does, you should take good care of it with regular maintenance and cleaning. Doing so will not only make the pool safe to swim in, but it will also go a long way towards preserving the pool’s life span. It’s also better to pay for regular maintenance and cleaning than expensive repairs and new pool equipment in case something breaks down.

As a homeowner, how should you go about maintaining and cleaning your swimming pool? If you want to extend your swimming pool’s life, here’s what you should do:

Swimming Pool Cleaning

The most important thing you need to do to maintain a healthy and long-lasting pool is clean it, of course. The schedule of cleaning actually depends on how often and when the pool is used.

That said, it’s best to have a regular maintenance schedule. If the pool is used frequently, then you may want to clean it on a weekly basis. Otherwise, you can opt for biweekly or monthly cleaning. But if you ever host a pool party, you should clean the pool after the festivities end.

When cleaning, make sure that you don’t stop at adjusting the chemicals in the water. You also need to maintain the sides, bottom, and the filtration system. Use a skimmer to remove debris, such as leaves, flowers, and pollen, from the pool.

Swimming Pool Equipment

When it comes to swimming pool maintenance, proper use and handling of equipment shouldn’t be neglected. You have to take that into consideration for both the summer and winter months.

This entails opening and closing your pool immediately to keep it safe and healthy. Not closing your pool correctly will cause problems over time. Also, pool equipment and chemicals should be properly stored in a secure place, particularly during the off-season.

Swimming Pool Repairs

You may need to have your swimming pool repaired from time to time. That’s why you should always be on the lookout for problems with your pool and its equipment. If left unattended or taken for granted, chances are what should’ve been minor repairs will become major problems. Fixing such problems can be quite costly.

For instance, if you notice a tear in your pool’s lining, contact a repairman to have it fixed as soon as possible. The same is true for your filters if they don’t seem to work the way they should.

Chemical Balance

Finally, there should be a continuous balance of chemicals in your swimming pool. It can be pretty daunting to get that right. You may have to try again and again; however, it is imperative that you don’t give up on it. It’s important that you keep the right balance of chlorine and pH level when it comes to your pool’s water.

Doing so will ensure the utmost cleanliness of your swimming pool, the safety of the water, and the privilege of being able to make the most out of your swimming pool.

Purple Heart Pools is a top-rated pool maintenance company in Jacksonville, get in touch today to see how we can help.

Cleaning and Maintaining Different Pool Filter Types

When you splash around in your swimming pool during the summer, you will leave behind a ton of debris that your filter will pick up from the water. Your pool filter plays a crucial role in keeping its water free of debris and impurities, soy you need to keep it clean and well maintained. When summer turns to fall, which will eventually give way to winter, your pool will lie dormant for some time. It is during this time (i.e., the cold months) when you should clean your pool filter.

Even if your pool is relatively new, you should still maintain your pool filter regularly. That will go a long way towards the upkeep of hygiene, chemical balance, and water circulation in your pool. Maintenance extends the lifespan of your pool filter, enabling it to perform well for a much longer period. As long as your pool filters are working, you can prevent more expensive health and pool issues from arising.

Commonly-used types of pool filters in Florida

Pool owners in Florida use different types of filters. Before you start cleaning and maintaining your filter, you need to know what kind of filter your pool has so that you’ll know how to do the cleaning and maintenance correctly. Below is a list of commonly-used swimming pool filters in Florida.

1. Cartridge Filter

Cartridge filters have two parts: the coarse cartridge frame and the finer mesh structure. The former traps larger pieces of debris, whereas the finer mesh structure collects smaller dirt and fluid impurities, such as suntan and shampoo. These two components work together to ensure that only clean water enters your pool. Cleaning a cartridge filter is pretty straightforward. You only have to remove the cartridge, place it near your house’s drainage, and use a pressure washer to hose the debris off.

2. Sand Filter

Unlike a cartridge filter, sand filters become more effective as they gather more debris. That’s because sand filters are designed to incorporate into the filtering mechanism itself the sediment they trap. The filtered water passes through while the sediment gets stuck and becomes part of the filtering element of the sand filter. The downside with sand filters is that the small sediment they trap can get stuck in the pool filter’s pore spaces, reducing water flow in between those gaps. Cleaning your sand filter this autumn will help keep the pore pressure at an acceptable level.

To clean this type of filter, you first have to shut down the pump that brings it water. Once the pump is closed, attach the filter’s backwash hose and set your pump lever settings to “backwash.” Once you turn on your pump again, it will expel the dirt it accumulated last summer. A separate pipe will drain the water containing the dirt. Then, turn the setting back to “rinse” before you shut the pump off for the winter.

3. Diatomaceous Earth (DE) filter

A diatomaceous earth (DE) filter also has a backwash setting, like a sand filter. But these types of filters are made of the remains of siliceous microscopic organisms called diatoms. Because of these diatoms’ size, they can trap finer sediment than what sand filters and cartridge filters can. The high filtering efficiency of DE filters makes it the most expensive option among all filters, which is why those who own a DE filter need to extend the lifespan of their filter to get the most bang for their buck. DE filters can also become clogged over time, which contributes to reduced water flow. Cleaning a DE filter is like cleaning a sand filter. All you need to do is to shut your pool’s pump, activate the backwash setting, and rinse.

Hire a professional to maintain your pool filter

Regular pool filter cleaning and maintenance is a must if you want to keep your filter working for years to come. If you have no more time to clean your pool filter before the cold season comes, you can let a professional do it instead.

Purple Heart Pools is a top-rated pool maintenance company in Jacksonville, get in touch today to see how we can help.

Be Wary! Here’s How Humidity Affects Indoor Pools..

It’s important that you clean and maintains your indoor pool regularly. It’s better to swim in a pool that is crystal-clear, doesn’t stink, and won’t trigger your allergies. But an indoor pool ought to be protected from algae growth, metallic stains, falling leaves, dust, and other debris.

One common problem with indoor pools is the increase in humidity. Too much humidity can damage electrical systems and increase wood rot.

This can compromise the swimming experience as a whole, so it pays to learn more about the negative effects humidity can have on an indoor pool. When you do, you’ll know how to address the problem.

Chlorine

In most cases, chlorine is used to sanitize a swimming pool. When poured into water, it breaks down into different chemicals and kills bacteria through a relatively simple chemical reaction. It prevents algae and bacteria from invading the water and spreading throughout the pool.

But here’s the caveat: chlorine is aggressive and can react significantly with high humidity. This happens when the chlorine travels with water vapor and spreads through condensation. It might attack and harm the surrounding structure and building materials that are reinforced by humidity. The good news though is that humidity can be regulated with proper circulation and reduction.

Damage

Damage on pool structure and materials shouldn’t be taken for granted. This can significantly be impacted by high humidity. A moist environment allows bacteria and mold to flourish, hastening damage to concrete and wood rot over time. What more if humidity and condensation are added and infused with chlorine? The situation can become extremely problematic. Your next course of action should be to get the humidity levels under control. Staying on top of this will enable you to avoid water damage and preserve nearby building materials.

Costs

A dehumidifier and ventilation are vital to an indoor pool. A dehumidifier pulls water vapor out of the air to limit humidity. Meanwhile, proper ventilation is more of a preventative step as a more proactive approach. The use of ventilation, airflow, and a dehumidifier should all work together to produce optimal results in terms of pool maintenance.

But here’s the catch: it can be pretty expensive to install and maintain this equipment for your indoor pool. That said, think of how can this help save you in the long run. If left unattended, damaged surrounding structures and building materials can be expensive to repair. The bottom line is, as always, prevention is better than cure.

Comfort

Finally, the comfort that your indoor pool provides is a top priority. This is simply because a pool is meant to be enjoyed. You can relax and unwind in your pool. A good, clean pool is suitable for swimming. A humid environment can get in the way of you using your pool to chill on a particularly hot day.

In the end, investing in the tools and planning needed to control the humidity can help you make the most out of your indoor pool. So what are you waiting for? Maintain your pool’s humidity and enjoy taking a dip in it!

Purple Heart Pools is a top-rated pool maintenance company in Jacksonville, get in touch today to see how we can help.

3 Ways to Sanitize Your Pool Without Chlorine Risks.

Besides the middle of the winter solstice, any season is the time where families and friends can relax, unwind, and dip in the pool to beat the heat of the sun. In that regard, swimming pools bring along tan lines and fun times, but with the number of people jumping in and out, it can transform into a pool of germs and bacteria when left unattended. 

That’s why chlorine is added as it is the most commonly used disinfectant to protect people from waterborne diseases. On the one hand, you do get a clean pool along with an unforgettable and distinct smell. On the other hand, avid pool lovers struggling with sensitive skin may be susceptible to rashes and red eyes for kids and adults alike. 

Consequently, failing to do a chlorine check can also pose some health risks, and the thought of that can suck out the excitement often associated with pools. To that end, here are some alternative methods that can disinfect the pool while maintaining a swimmer-friendly environment:

Alternative Method #1: Salt Sanitizers

Also known as saltwater chlorinators, this is a form of off-the-shelf chlorine that is more potent and long-lasting as it uses the electrolytic conversion of salt, which removes the need to add a huge quantity of chlorine liquids to the pool. 

To wit, the salt sanitizer is comprised of the cell, wherein the salt is converted into chloride ions, while the control board allows pool owners to have a strong foothold on the amount of chlorine generated. In that regard, this regenerative process turns the salt into a form of chlorine gas. Instead of containing a composition of potentially toxic chemical treatments, this low-cost chlorine alternative only uses table salt to kill bacteria, viruses, algae, and other microorganisms without being a risk to swimmers. 

To put it into context, think of it dissolving in the water and passing through the system, where the electrolysis transformation happens and turns into a bacteria-busting formula that has a similar saline solution to human tears. To maintain the saltwater, be sure to set a consistent level of salinity between 2700 and 3900 ppm.

Alternative Method #2: Ultraviolet Light Sanitization

UV light sanitization is a powerful method of sterilizing the pool water using short-wavelength UV-C to distort the DNA of damaging and unfriendly bacteria, cysts, and algae. This is a fool-proof way of eliminating chlorine-resistant viruses, microorganisms, and protozoa. It works by using ultraviolet radiation to exude potent, electromagnetic rays to destroy chloramines and other infectious bacteria as water enters an enclosed chamber through the pool equipment. 

This reduces the risk of skin allergies, skin or lung asthma, as well as irritation to your lungs. It may sound like a complicated set-up, but it is simple to install and investing in one doesn’t break your bank either, making it a low-cost method that allows you to maintain a safe, and chemical treatment free zone where families and friends can have some worry-free fun under the sun. 

Alternative Method #3: Ozone Purification

Ozone purification is arguably the fastest method of disinfecting your pool and is roughly 50% stronger and vigorous than chlorine. Despite its overwhelming strength and uncanny ability to instantly kill bacteria, it remains skin-friendly as ozone, particularly O3, is converted into oxygen after it latches onto the cell wall of bacteria, viruses, and other toxic microorganisms that could produce an unpleasant, musky odor in the water and potentially irritate your body. 

However, this cannot sanitize the pool on its own and will need to be supported by chlorine, none-chlorine shock, or bromine. It may be counterintuitive to use this as you will still need to use chlorine, which is what you were against in the first place, but the amount you need to disinfect the pool completely will be reduced by 90%. This allows the chemical sanitizer to do its job without leaving behind any undesirable side-effects.

Purple Heart Pools is a top-rated pool maintenance company in Jacksonville, get in touch today.

What Swimming Pool Owners Need to Know About Brushing Their Pool.

For most pool owners, brushing the swimming pool is another tedious chore. However, ask a pool maintenance professional in Jacksonville, and they will tell you that brushing is an essential responsibility that all pool owners must do, whether doing it themselves or through hiring a pool cleaner. The reasons are explained below:

Why do I need to brush my new pool?

Brushing is a necessary task that owners of brand new pools have to do. To extend the life of your new pool, have its surface brushed as soon as it is finished. The water in your pool contains calcium and other ions that tend to stick to the surface of your pool. These ions prevent the plaster, aggregates, or cement in the new pool from curing fully. In the long run, a pool that cured poorly will get damaged, which can harm the users of the pool. You would also incur costly repairs, as the same ions also discolor the pool’s surface even a few weeks after you’ve built your pool. 

Brushing your swimming pool three times a day, especially during the first two weeks after it was built, helps remove the ions that might interfere with your pool’s curing process. Brushing would also ensure that the pool’s colors remain fresh-looking. If you don’t have the time nor energy to do so, you can let a professional pool maintenance team do this work for you.

Do I Really Need To Brush Regularly?

Brushing does not end after a new pool’s curing period. You will need to you keep off dirt, grime, and algae from building up on your pool’s surface. By brushing off these elements, you prevent damage and extend its lifespan. You would also keep those swimming in it safe. Brushing will give your swimming pool and the water a sparkling, fresh look that will continue to beckon people to take a dip in it. Thus, you need to brush your pool at least once a week to keep it in good order. A professional pool cleaner can also help you in this maintenance task.

Additional tips for brushing your swimming pool

If you are going to open and use your pool for the first time after the winter, you need to pick up larger debris like leaves before beginning to brush your pool. Inspect your pool filter to check any algae build up or see if it needs replacement before the pool is used. Then, give your pool a thorough brushing before having it filled up with water (if you had it drained recently). When you are about to close your pool during the fall, pick up large debris that could have accumulated on the surface and have the filters cleaned. Then, brush your pool again to remove any algae and minerals that have built up on the surface to keep it clean during the winter.

Who can brush your swimming pool for you

If you find brushing your pool regularly to be a tiresome responsibility, you can always hire a pool cleaning professional in Jacksonville to carry out this tedious task. By hiring Purple Heart Pools today, you can rest assured that your pool gets the brushing it needs to stay safe for pool users, last longer, and look good. 

Purple Heart Pools is a top rated pool maintenance company in Jacksonville, get in touch today to see how we can help.

Our Tips for Pool Maintenance to Fix Stain!

During the summer, it feels good to plunge into a swimming pool and splash around, especially on a particularly hot day. If you own a pool, it’s best to keep it clean and ready for use every day. But if you don’t use it for a while, your pool won’t be as clean as it ought to be. After months of being covered, it may have been invaded by plants and stains. It’s not easy to clean and maintain your pool. You really have to stay on top of it.

Pool cleaning and maintenance is important. But how do you go about it? Here are some tips for pool maintenance, which are particularly effective against plant growth and stains.

Algae Control

Algae growth is the most common problem of residential pools. Algae are small, non-flowering plants that grow underwater. There are plenty of algae species, and they come in black, green, mustard, and red types. Algae can make the water in your pool appear cloudy or milky. You might be wondering how algae gets into residential pools. Chances are they were transferred into your pool by rain, wind, or even the water used to fill it up. If your pool isn’t regularly maintained, algae can grow and multiply rapidly in it. To control algae growth, here’s what you need to do:

  • Regular Vacuuming – You may want to consider vacuuming your pool regularly. You can easily get rid of algae in your pool by vacuuming it. If you do this on a regular basis, there will be no opportunity for the algae to grow.
  • Chlorine Solution – You can also try maintaining the chlorine levels in your pool. You can simply add chlorine to your pool on a regular basis or whenever you need to. This is a great way to control the growth of algae.

Metallic Stains Removal

Another problem that you may encounter when it comes to your pool are metallic stains. They sit on the wall and floor of your pool. They are caused by the metallic materials of your pool. Chances are acidic rainwater can cause runoff from brick, marble, and stone decks to drip into your pool. These can significantly contaminate the water. Not to mention the chemicals and deteriorating equipment, which can add to the whole problem. Here’s what you can do in order to remove metallic stains:

  • Coarse cleanser and gentle sponge – These metallic stains aren’t permanent. They can be easily removed using a coarse cleanser and a gentle sponge. This can be quite tedious if you do it once in a while. But if you clean stains as soon as possible, then you won’t have a problem. Cleaning your pool regularly is key.
  • Pool chemistry – Another thing to focus on is the pool’s chemistry. It’s worth noting that the acidity of pure water may corrode metal components of plaster pools. It may also eat away at vinyl liners. That’s why it’s wise to add hardeners such as calcium. This will then increase the alkalinity of the water in your pool.

Final Words

Ultimately, the secrets to a clean pool with crystal-clear water are regular cleaning and proper maintenance. The pool cleaning and maintenance tips mentioned above will help you big time. However, if you need further assistance, there are companies out there that offer pool cleaning and repair services. Once you hire a company, be sure to ask about pool cleaning tips that you can use.

Purple Heart Pools is a top rated pool maintenance company in Jacksonville, get in touch today to see how we can help.

Our Guide to Hot Tub Maintenance

Hot tubs are an excellent place for people to unwind and relax. These pools can be for private or communal use. Regardless of the kind of hot tub you own or operate, you need to keep it well-maintained and hygienic at all times. Here are some of the most vital maintenance tips for your hot tub:

Surface cleaning tips

Strong chemicals and rough scouring pads can cause damage to your hot tub’s surfaces over time. Instead, remove the build-up of grime on said surfaces using a nylon scrubber or soft rag. Use mild, non-abrasive, and non-foamy cleansers when you do this. For minor cleaning tasks, you can use regular baking soda as a cleanser. There are also products that you can buy to keep the glazed surfaces of your hot tub shiny.

To clean your hot tub’s vinyl door, prepare a mild soap solution of baking soda or one teaspoon dishwashing liquid mixed per eight liters of water. Use a sponge to apply the solution before rinsing it off with a stream of water from a hose. Open the vinyl door and wash the other side with water before wiping it down with a dry rag.

Proper pool use tips

Make sure to shower with fresh water before you soak in your hot tub. Doing this will ensure that no soap or detergent residue from your body or bathing suit will leave itself on your hot tub’s filters. This will extend the filters’ lifespan. Also, use the soapless rinse cycle instead of washing your bathing suit in soapy water.

When you fill your hot tub with water, use a pre-filter to ensure that the water that goes into your hot tub is clean. The pre-filter can be attached to your source hose or fixture to screen out metal ions, tannins, and organic contaminants that can ruin your water and hot tub.

When you’re done, drain the used water and refill your hot tub with a fresh supply of water. Make sure to follow the instructions in the pool manufacturer’s manual when draining and refilling. Draining and refilling will remove the detergent and soap particles that could have collected on the surface of your hot tub over time.

Spa filter cartridges tips

Your spa filter cartridges accumulate debris and mineral deposits over time. Thus, you need to unclog your filters regularly to keep your hot tub’s water flow running smoothly. Rotate your hot tub’s spray cartridges as you flush it with a jet of water to expel any particles that may have blocked the filter’s pleats. If your hot tub has been using a spa filter cartridge for three or more years, replace it with a new cartridge since the pleats may have been worn down.

Pool water chlorination tips

Chlorination helps make the water in your hot tub hostile to bacteria and renders other organic and chemical impurities in the water inert, ensuring your water’s cleanliness. Chlorinate your spa water according to the instructions of the chlorine solution manufacturer. Be careful not to use more chlorine solution then is recommended to prevent skin, eye, and lung irritation.

Energy efficiency tips

A hot tub’s energy efficiency refers to the amount of electricity it uses to keep the water warm. Make sure that the seal of the hot tub’s doors are tight to prevent heat from escaping. If there are signs of fading, cracking, and sagging in your hot tub’s door, replace it with a new one.

You should also ensure the energy efficiency of your hot tub’s heating system, especially during the winter. To protect the sensitive components of the pool’s heating system from freezing damage, wrap a vinyl-fiberglass winter blanket around your hot tub when it’s not in use.

Purple Heart Pools is a top rated pool maintenance company in Jacksonville, get in touch today!

Common Swimming Pool Myths That Need to Be Debunked

Whether you’ve had a pool in your backyard for years or you’re thinking of getting one installed, it’s important to know that there is a ton of work that goes into maintaining a body of water behind your home. There are also a lot of misconceptions that come with pools. Therefore, it’s crucial for you to learn what is real and what isn’t so that you can make an informed decision about whether or not you want a pool in your backyard. Knowing all there is to know about pools will also ensure that you take good care of it and don’t harm your health or that of others in any way.

Here are a few common swimming pool myths that need to be debunked:

“Saltwater pools don’t use chlorine.”

This myth began when people started to get more fearful concerning the use of chlorine. As the substance developed a reputation for being harmful, people began to choose saltwater pools instead, assuming that they did not need any chlorine. Unfortunately, this is not the case. The truth is that saltwater pools require just as much chlorine as other pools do. There is saltwater chlorinator that the saltwater will break down into chlorine in order to keep the water clean. Salt alone cannot sanitize a pool. A little bit of chemical help must be used in order for it to be effective.

“Chlorine is bad for you.”

Chlorine has actually been used in most of the world’s drinking water since the 1900s. The substance is safe until it is exposed to organic compounds. Therefore, as long as you are using the chemical correctly and in a controlled environment, you should be just fine.

“You don’t have to shower before a swim.”

It might seem redundant to shower before swimming. However, there is a reason why we are told to do this. Our bodies are covered in organic compounds such as urine, sweat, body oils, and even cosmetics. It is important that you reduce the number of organic compounds on your body before you jump in for a dip as this will keep your pool water cleaner for longer.

“If it looks clear, it’s clean.”

A pool might look more refreshing when it’s clear, not every transparent pool is clean. There could still be unhealthy levels of microorganisms living within the clearest of pools. It’s crucial that you never skip your normal maintenance or cleaning process just because your pool looks clear.

“Pool water is drinkable.”

While, yes, pool water is technically disinfected and chlorine is safe for consumption in smaller amounts, you should not intentionally drink your pool water. Your pool water will continuously be exposed to the elements and because of that, it may have many different types of contaminants in it that are not safe for your consumption.

“Chlorine will make your eyes red.”

Your eyes are not itchy or red after a swim because of the chlorine in the water. Instead, it is the result of abnormally high pH or chloramine levels in your pool. This could also be an indication that there is not enough chlorine. You should test your pool water levels and make the appropriate adjustments.

“Chlorine can turn your hair green.”

This is another myth that is incorrectly attributed to chlorine. Copper will only cause this dye effect and it is normally added to your pool to control the growth of algae. If you don’t want to come out of the pool with green hair, wear a swimming cap. Alternatively, you can wash and shampoo your hair after a swim as that will get rid of the copper before it even affects your hair.

“If you smell strong chlorine, the pool is clean.”

If your pool is clean, there should not be an overwhelmingly chemical smell to it. If you do notice a strong smell coming off your pool, that might mean that the chlorine in your water has been mixed with an exceptional amount of contaminants. Is the clear indication that there is something wrong with your pool water and it should be tested as soon as possible.

Purple Heart Pools is a top rated pool maintenance company in Jacksonville, get in touch today to see how we can help.

How to Prepare Your Pool For The Spring & Summer Days

You don’t have to wait for summer days to come to jump into the pool. Oftentimes it gets warm enough to go for a swim during the spring. Before you change into your swimsuit, however, it is crucial to make sure that your pool is ready.

During the cold season, chances are that you closed your pool or left it unattended. It wouldn’t be smart to simply jump in without preparing or cleaning it. Here is how to prepare your pool before the warmer days come:

Schedule the necessary pool services

Although you may not necessarily see anything wrong with your pool, that does not mean that it is ready. There are some pool problems that you cannot see with your naked eye like chemical imbalances, plumbing issues and more. This is the reason why we recommend you have your pool serviced at least once prior to using it.

Since your pool has been sitting for months, you never know what could have happened. Debris or harmful bacteria forming in the pool are some of the leading causes for sickness when using an unsafe pool. When you contact a professional pool cleaning company, make sure that they list out their services. A good company should offer strainer basket cleaning, walls and steps scrubbing, debris removal, pool floor vacuuming, and filter backwashing.

Get a professional for maintenance and repair

If you notice broken tiles or any other damages that may pose safety risks, it is best to hire a professional to take care of the repair as soon as possible. It is dangerous to have people in the pool when there could be a trip or hazard issues.

Having a repairman to call on for regular maintenance is highly encouraged. It never hurts to make sure that everything works properly. Make sure you book your cleaning before spring arrives. In most cases, pool professionals are in high demand once pool season approaches. The longer you wait, the worse issues become. Even tiny damages can grow to become much bigger problems.

Make sure your pool chemicals are balanced

This is an essential factor that many people tend to forget. It’s crucial for you to make sure that the chemicals in your pool water are correctly balanced. If you fail to assess the quality of your water infections or health hazards could result. Avoid eyeballing the amount of chemical you put in your pool water.

There is no way that you can balance them with sight alone. Signs of unbalanced water include green and cloudy-looking water, foaming water, or stained pool walls. That being said, this doesn’t mean that clear water equals well-balanced chemicals. You still have to test your pool water for assurance.

It might be challenging to get the right chemicals for your pool. If you have no experience or knowledge about it, it’s best to contact a professional to assist you. They know the right chemicals and the amounts that should be put in.

Clean the area around the pool regularly

Now that your pool is free of dirt and bacteria, it is time to clean the area around the pool. Who wants to swim in a pool surrounded by leaves and debris? Not only should you sweep the area, but you should also wash and rearrange the poolside furniture. Prepare the pool area for everyone to come out and enjoy the sun as warm days roll around.

Purple Heart Pools is a top rated pool maintenance company in Jacksonville, get in touch today to see how we can help.